This is a nice looking bench and a nice size, but if I saw it in a store I wouldn't have spent over $80 for it. The material is pressed particle board so be careful not to split/shred it. The instructions could be better - we noticed 2 specific steps were missing. Thankfully my husband has lots of experience putting things together, otherwise we would've made mistakes. The bottom decorative moulding piece doesn't have any support in the center since it only attaches at the sides, so we're going to add an elbow behind it for support, since it bows in a little and could easily be damaged when moving it or bumping it with a foot by accident. The top & side moulding pieces give it a finished look, but they do reduce the hole size by 1-2" in case you look for baskets to place in the cubby holes. Also the back cover piece simply nails onto the sides and vertical boards - it doesn't recess into them, so need to be careful not to snag it when moving it around. It did arrive very quickly - less than a week - awesome!