This soap dispenser was the third in a line of dispensers purchased to try and match a Grohe sink fixture (the matching Grohe was ugly and very poorly reviewed). This one looks awesome and works great. It is VERY well built, including a stainless steel dispenser bottle. The only downsides are: 1) There is a slight list to the top pump. I.E. it tilts ever so slightly towards the dispenser arm. Not enough to notice unless you stare at it, and it can be righted. It isn't a big deal, 2) It will not work with a very think counter-top construction. This probably isn't a problem for most applications, but for me, it was almost a major problem. I have 2cm counter-top on top of a cabinet base that is ~3cm (I think). The stainless steel thread connector that connects the pump with the bottle was too short. Thus the tightening attachment would not fit on, and I could not secure the pump. I was looking at having to buy a special, wide drill bit that would allow me to ream out an already existing hole (always a difficult endeavor). Fortunately, the stainless bottle is wide (and strong, since it is stainless), and I was able to tighten it on so that the top of the bottle pressed tightly against the frame underneath the sink. Worked great Glad it did because this is easily the most solid built pump I have encountered.
- How did the color on site compare with the actual product? good
- Please tell us about the quality of the product. Very high quality, soldi construction