Electric Water Boiler and Dispenser Commercial 10L LCD Display

Our water boiler can provide enough hot water to meet people's needs. Multiple protections against overheating, scalding, dry burning, steam and a two-stage filtration device (PP cotton core, activated carbon) provide you with healthier drinking water.

Specification

• Material: 201/304 Stainless Steel, Copper
• Color: Black/Silver（Optional）
• Process: Brushed
• Model: EWD-10B2
• Heating Method: Stepping Type
• Assembly Required: Yes
• Display: LCD
• Voltage: 110V
• Power: 2.4kW
• Capacity: 10L/2.64gal
• Inlet Pipe Length: 1m/3.28ft
• Temperature Range: 0-100℃/32-212℉
• Rated Water Pressure: 100-100kPa
• Water Production: 35L/H / 9.25gal/H
• Gross Weight: 9kg/ 19.84 lbs 
• Net Weight: 6.8kg/ 15 lbs
• Product Size: 28.5*20.5*55 cm/ 11.22*8.07*21.65 in

Features

• Intelligent Step Heating: When the machine is at a low water level will automatically heat, when the water is heated to the set temperature will be fed again ( feeding for 3 seconds, stopping for 3 seconds),   When the temperature is 37.4 ℉ lower than the set temperature, it will automatically heat up.
• LCD Display: The smart LCD display shows you the temperature in real time and lets you see all the functions at a glance.  
• Three Insulation Layers: Three insulation layers  (stainless steel inner liner, foam insulation layer, brushed stainless steel outer layer) can effectively reduce heat dissipation, thus saving more power.
• Multiple Protection: Multiple protections (anti overheating / anti-scald / anti-dry burn / anti-steam protection) make it safer for you to use.

How to Install

1. Please carefully place the product on the countertop or stand, and place the water receiving plate under the switch.

2. The machine uses quick couplings for water intake; please use tap water or RO pure water for water connection. If you use tap water, please add a water filter to ensure drinking water hygiene. 

4. If the water pressure of the water source exceeds 3Kgf/cm2, please install a pressure-reducing valve at the inlet of the water pipe to reduce the water pressure to below 3Kgf/cm2  in order to avoid the rupture of the water pipe.

5. When the power cord is connected to the power supply, please use the correct voltage as indicated on the nameplate of the machine. The current should not exceed the safety load of the wire diameter and please use a special circuit. The power cord plug should be connected to the power outlet with a grounding system.

Package Included

• 1 * Electric Water Boiler
• 1 * English Manual
• 1 * Inlet Pipe
• All Accessories for Installation

Notes

1.The exhaust port is on the left side of the back of the machine. Please do not touch, block or place any objects in the exhaust port to avoid danger.

2.This machine should only be used for heating boiling water, and we are not responsible for any malfunction caused by using it for other than normal purposes.

3.Inspection of circuits, machines, and installation of machines must be done by an electrician.

4.Products with electrical plugs are designed for use in the US. Please check compatibility before purchasing.

5.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.