"Will you ship this bipod to Canada?"
Good quality item at the right price. No complaints....
ITEM#: 12142011This M14 M1A steel rifle bipod will fit all types of M1A-style rifles by Springfield, Fulton Armory and Norinco. This bipod features all-steel construction and has four stops for adjusting the leg length.
- Compatible with M1A rifles from Springfield, Fulton Armory and Norinco
- Materials: Steel
- Dimensions: 5 inches wide x 14 inches long
|Country of Origin||China|
Fits my M1A and is an exact copy of the original GIRead More
Junk China crap
Ok boys get the files and the dremel out for this one. Needs to be fitted to my US made M1a. Poorly made quality wise. Will be good for the range nothing else. Would not be running with this and drop to the prone and expected this to work. $$$ and free shipping, thats the only reason its not going back.Read More
fit rifle fine, bolt was a little tight, but some wd-40 took care of that, worth the money!!!Read More
You will need a Dremel Tool or Hand Grinder
Typical Chinese quality, but needs to be fitted before it will work correctly. I ordered it for my Springfield Armory M1A. When it arrived and I tried to install it, it was immediately apparent that the Clamp that attaches to the Gas Cylinder Housing was not within specifications and only one side of the clamp would attach properly. I ended up using a hand grinder to take off the lips on one side. At least that way, one side of the Clamp would grip properly and allow a snug fit. The lips on the clamp were cut a full 1/16th of an inch to short. Then I found the right Pivot Leg would not snap/lock into position when it was extended and the Left Pivot leg would not snap/lock into position when it was folded. I had to enlarge the Locking cuts/holes almost a 1/16 of an inch wider and deeper to allow the pins to lock. I took it out and fired 100 rounds and functioned properly. If you don't mind spending about 20 minutes "fitting" to your gun, it's a good deal for the money.Read More
woulg damage gun to mount it
Did not use. Would damage gas tube to put it on the gun.Read More
Its a very nice product with a few minor adjustments needed to fit correctlyRead More
good quality almost as good as the original.Fits on rifle barrel just like it should.Read More
Works but needs some help
I expected a military green product but received black. Not really a problem. I did replace the thin, short cotter pin with a larger, longer pin. I also replaced the locking screw with a cap screw for better hold and easier more positive on/off using a L-key rather than a screw driver. I haven't fired the weapon with the bipod installed yet but it appears to be strong enough to hold up. Once on the weapon the bipod works smoothly and the legs lock tight.Read More
The jaws part of the bipod is cast and should of been machined. Due to that fact, it will not contact the rifles gas cylinder with any precision. One shot and it loosens up. Total piece of junk. The rest of the bipod is constructed OK, but being unable to attach to the rifle makes that fact pointless.Read More
It was acceptable as a decoration
If you're looking into buying this bipod as a prop for your m14, or m1 (real or replica rifle), then I would suggest that you buy it because you will not find the correct bipod elsewhere for a similar price. However, if you are looking into having a bipod that will survive being banged around, abused, slammed, and used in mil-sim combat, look elsewhere. It *is* made of steel, but it isn't very robust steel. A good portion of the bipod is hollow. Also, if you're looking into buying this bipod, it will most likely need to be modified to work properly. When mine arrived, the lips of the bipod that clamp on the gas tube, and allow the bipod to swivel back and forth were crammed together and locked tight with the powder coat paint. I had to take the bipoid apart, sand the paint off of the moving parts, and then oil the parts. All of the parts need oil. Most moving parts need to be sanded. All in all, it was a glad buy for only about $**Read More
Good price for close to Mil-Spec
Makes the rifle a bit heavy, but solid as a rock after you get the bipod tightened down.Read More
Questions & Answers
Hello mcpherson284, unfortunately, this item is out-of-stock. However, other similar item only ship to the U.S. Thank you for shopping with us.
Shipping & Returns
Our standard shipping method is ground shipping. We also offer expedited shipping for most items. Your final
shipping cost and estimated delivery timeframe will be available at checkout.
Standard shipping details
Expedited shipping details
Standard Return Policy:
Items must be returned in new or unused condition and contain all original materials included with the shipment. For the return policy on a Marketplace item, please refer to the Seller’s individual policy, located on the product page by clicking on the Seller name. More Details
FINAL SALE EXCLUSION: Items marked as FINAL SALE are not returnable unless the problem you experience is the result of our error.
For your protection, all orders are screened for security purposes. If your order is selected for review, our Loss Prevention Team may contact you by phone or email. There may be a two business day delay to process your order.
** Most Oversize orders are delivered within 1-4 weeks. Some orders may take 6 weeks to be delivered.