Blower should remain on and continuously inflate Water Park during use. Air flow through seams is normal.

It is normal to see bubbles rising on the surface of the pool and other wet areas of the bouncy castle (water park). During use, the blower will need to work continuously and the seams will 'bubble' (every product is tested for functionality prior to packaging, and it is normal for seams to seep air and water into the seams of sewn products).

It is common and essential that a small amount of air escapes from the seams, this release helps to maintain a balanced air pressure within the inflatable structure to ensure a safe and enjoyable jumping experience for your child.

Use of space: lawn soft ground. The use of the process is shown in the following chart (the manual has a detailed analysis): the water slide - - long air cylinder tied to the blower (inlet cylinder) - - the short air cylinder (outlet cylinder) tied to the blower - - open the blower - - the castle with the auxiliary package of large earth nails fixed on the lawn - - water slide installation of water pipes - - start using (strictly prohibited windy days and rainy days).

Falls onto hard surfaces can result in head or other serious injuries. Never place on concrete, asphalt, wood, packed earth, or other hard surfaces. Carpet over hard floors may not prevent injury.

Only for domestic use. Intended for outdoor domestic family use only. Not for use in public areas or as a rental.

Product should never be dragged across concrete, pavement or other rough surfaces.

Do not set up in windy or rainy conditions: sudden gusts of wind may lift the product off the ground.

Make sure the area around the product is secure.Minimum clearance zones: Place at least 2m / 6.56ft away from any other objects. Objects to be avoided include but are not limited to fences, buildings, trees, overhead branches, laundry lines, electrical wires, walls, or bodies or sources of water.