Good spraying radius and ample amounts of power. I had no problem painting a ceiling with it. Sometimes the interior parts come loose and you will need to screw them back into place, an odd exercise because the sprayer comes preassembled. Do not overfill the paint cup, let it dry, and then try to remove the cup. I have been attempting to unscrew the cup for the past two days with no success. Always clean any excess paint off the top of the cup before putting the tool away, otherwise trying to remove the cup will frustrate the hell out of you! Lesson learned. Overall, I think it's a great product and would recommend it to someone who does not want to break their bank account on a paint sprayer.
Good sprayer and good value but took some time to figure out. Had to get paint thinner to mix with even simple white paint to get this to work properly, doesn't seem like that should be necessary. Spent forever trying to get the mix right but after that was happen with the speed and results.
I used this Fuji system to spray two projects so far. The water based clear coat went down smoother and smoother with each coat. The spray allowed me to clear corners without leaving or worrying about puddles. I also sprayed water based paint. This required a little thinning for both the primer and paint, but not much. The trickiest part of spraying was going slow enough to get a proper thickness coat. Properly sprayed coats required the lightest 400 grit sanding and a simple polish. Some paint backed up into the pressurizing tube but this part is easy enough to clean or replace. Took the gun apart several times and it went back together flawlessly each time. Used outdoors so the turbine did not seem too loud. Wish the turbine filters were a little bit better but fingers crossed haven't seen any dust in finish.
If you need further help or information please visit our Online Help Center