Hollyland LARK M2S COMBO 2-Person Wireless Microphone System
Record up to two people in mobile journalism or content creation applications using this LARK M2S Combo Wireless Microphone System. The system includes two ultracompact transmitters with built-in omnidirectional microphones for discreet recording, a USB-C plug-in receiver for direct connection with mobile devices, a camera-mount receiver, a USB-C to Lightning adapter cable, and a charging case. The transmitters feature a titanium clip-on design to attach securely to your talent and do not have visible logos for a low-profile appearance.
Stable Audio Transmission
The LARK M2S transmitters are engineered with RF interference-resistant circuits for pristine sound quality in most environments. Audio is transmitted via 2.4 GHz frequency up to 1000' away. Easily capture 24-bit, 48 kHz audio with a 70 dB signal-to-noise ratio and 116 dB SPL. Toggle environmental noise cancellation using the transmitters' onboard controls for clear audio capture in loud spaces. Included windscreens improve audio quality outdoors.

Camera-Mount and Plug-In Receiver

• The mini combo version of the LARK M2S includes a camera-mount receiver and USB-C plug-in receiver. Use the USB-C to Lightning adapter cable for compatibility with older iOS devices.
• The camera-mount, dual-channel receiver features an integrated camera-mount interface. A 3.5mm TRS output port records audio directly to your device of choice. Onboard controls allow you to toggle between stereo and mono modes or adjust the volume of your recording. LED indicators show the mode status of each transmitter unit. Use the included 3.5mm TRS cable to adapt the existing port on the receiver to a wide variety of devices.
• The USB-C, dual-channel plug-in receiver is compatible with iOS and Android devices. It runs on plug-in power from your connected device and features LED indicators to show the mode status of each transmitter unit.

LarkSound App
Connect your LARK M2 system to the LarkSound App to adjust parameters like volume and noise cancellation, update firmware, or check real-time audio status all from your iOS or Android compatible smartphone. When filming with your mobile device, toggle remote video recording by pressing down on the transmitter's onboard button twice. Your smartphone can also playback your recordings when connected to the receiver without needing to unplug it.

Receiver

• Receiver Type: 1x Camera-Mount & 1x Plug-In (USB-C)
• Mounting Options: Shoe-Mount (with Included Hardware) & USB-C Plug-In (with Included Adapter)
• Antenna: 1x Fixed Internal
• Number of Audio Channels: 2
• Audio I/O: 1x 1/8" / 3.5 mm TRS Unbalanced Output (on Camera-Mount Receiver)
• Network I/O: No
• USB/Lightning Connectivity: 1x USB-C Male, 1x USB-C Female
• USB Class-Compliant: Yes
• Frequency Response: 20 Hz to 20 kHz
• Built-In Microphone: No
• Display: Single-LED Indicators Only
• Power Requirements: Battery, Bus Power (USB)

Transmitters

• Included Transmitters: 2x Bodypack with Microphone
• Antenna: Internal
• Input Level: Microphone
• Built-In Microphone: Yes
• Audio I/O: No
• Bias/Plug-In & Phantom Power: No Bias/Plug-In Power, No Phantom Support
• USB I/O: No
• Muting: Off/On Switch
• Auto-Level/Gain: Yes
• Frequency Response: 20 Hz to 20 kHz
• Sync Method: 2.4 GHz QPSK
• Display: Single-LED Indicators Only

Microphones

• Microphone Type: 2x Built-In (Bodypack Transmitter)
• Polar Pattern: Omnidirectional

Power

• Receiver Battery Type: 1x Built-In Rechargeable - 145 mAh (Not Replaceable)
  
• Transmitter Battery Type: 1x Built-In Rechargeable (Not Replaceable)