Hollyland LARK M2 CAMERA 2-Person Wireless Camera-Mount Microphone System
Record up to two people in mobile journalism or content creation applications using this shine charcoal, 2.4 GHz LARK M2 DUO Wireless Camera-Mount Microphone System. The system includes two transmitters with built-in omnidirectional microphones and dual-interface mesh, a dual-channel camera-mount receiver, and a charging case. Magnetic back clips and silicone necklace cases make attaching your transmitters to your talent a breeze. Various adapter cables and an integrated camera shoe mount ensure wide device compatibility.

• Stable Audio Transmission
  High-gain Laser Direct Structuring (LDS) antennas ensure stable audio transmission free of all sorts of interference from up to 1000' away. Environmental noise cancellation minimizes frequency interference for improved vocal clarity. The LARK M2 captures 24-bit 48 kHz audio with a 70 dB signal-to-noise ratio and 115 dB SPL.
• Clip-On Transmitter Units
  The transmitter features a dual-interference design with a metallic mesh that protects against dust and 2.4 GHz, infrared, and RFI interference. Easily attach the transmitter with its omnidirectional microphone to your subject of choice using the included magnetic back clips or the silicone necklace cases.
• Dual-Channel Camera-Mount Receiver
  The receiver is dual-channel and features an integrated camera-mount interface. A 3.5mm TRS output port records audio directly to your device of choice. Onboard controls allow you to toggle between stereo and mono modes or adjust the volume of your recording. LED indicators show the mode status of each transmitter unit. Use the included USB-C, USB-C to Lightning, and 3.5mm TRS cables to adapt the existing ports on the receiver to a wide variety of devices.
• LarkSound App
  Connect your LARK M2 system to the LarkSound App to adjust parameters like volume and noise cancellation, update firmware, or check real-time audio status all from your iOS or Android compatible smartphone. When filming with your mobile device, toggle remote video recording by pressing down on the transmitter's onboard button twice.
• Long Battery Life, Charging Case
  
  • The transmitters feature a 90mAh internal battery with a 10-hour battery life. The receiver features a 145mAh internal battery with a 9-hour battery life. Once depleted, recharge all of the components in the included charging case in just 2 hours or via USB-C in 1.5 hours.
  • The charging case is specifically designed to accommodate the camera-mount receiver and two transmitter units. Its 1950mAh internal battery can recharge the entire system three times for a total battery life of 40 hours.

Receiver

• Receiver Type: Camera-Mount
• Mounting Options: Shoe-Mount (with Included Hardware)
• Antenna: Internal
• Number of Audio Channels: 2
• Audio I/O: 1x 1/8" / 3.5 mm TRS Unbalanced Output & 1x 1/8" / 3.5 mm TRS Unbalanced In/Out
• Frequency Response: 20 Hz to 20 kHz
  
• USB/Lightning Connectivity: USB-C Female
  
• Battery Type: 1x Built-In Rechargeable
  

Transmitter

• Transmitter Type: Clip-On with Microphone
• Audio I/O: No
  
• Muting: Off/On Switch
• Auto-Level Control: Yes
• Recorder Sample Rates: 48 kHz
• Recorder Bit Depths: 24-Bit
• Signal Processing: No
• Frequency Response: 20 Hz to 20 kHz
• Sync Method: 2.4 GHz QPSK
• Antenna: Internal
  
• Battery Type: 1x Built-In Rechargeable
  

Microphone

• Microphone Type: Integrated
  
• Sound Field: Mono
• Polar Pattern: Omnidirectional
• Frequency Range: 20 Hz to 20 kHz
• SNR: 70 dB
• Maximum SPL: 115 dB SPL
• Sensitivity: -37 dBV/Pa at 1 kHz