Magnificent - Made in Malaysia not China like most big box furniture stores -- a big plus for me This product is reasonably priced. I also had a coupon that knocked off about $50. I believe there are coupon codes on the internet that may give 10% off for new overstock customers. You just have to search for them. I was able to build this within a 4-5 hour time frame by myself (Male-44-280lbs-realitivly strong). It may take some to have 2 people to complete. It really depends on you. It comes in 4 separate boxes nicely wrapped no defects at all. Each box weights about 70lbs. I would build this on location. It is heavy to move. I rolled each box up one flight of stairs to a spare bedroom. I had to redo the bottom cabinet because the 2 horizontal pieces that separate the drawers were facing the wrong way. You may want to have good lighting, to see which side has the right painted side since both sides have a smooth surface. This cost me about 30 minutes to fix the issue. The rest of the pieces are easier to fit since you can tell by the pre-drilled holes if a piece will fit or not. The instructions are OK, but could be a little better. For instance, the drawer rails are difficult to see in the document. The rails are bent at the end making it difficult to see how to position them on the drawers. For reference, the end of the rails that are bent should be pointed toward the floor and not toward the ceiling. If you are doing this yourself, I would pre-insert the hardware for the top half then I would wait to piece together the top half until the bottom half is completed. I would carefully build the top half while sitting it on top of the bottom half. This takes a bit of coordination, so that the side panels dont fall, but I did it, so it can be done. Also, be careful when tightening the camlocks to not over tighten. They will bend out of shape if you tighten them too much. Overall, this product is well worth the money removing the middle man if you have the time and patience to build it. Lastly, you will need a power drill to tighten screws. A hand screw driver just wont do. It will take you 3 weeks to do it with a hand screwdriver, and it will probably be crocked when it is done. There was extra hardware nicely packaged, except one package was short two screws. I had extra in my tool chest, so not a big issue. Be careful when drilling in the screws for the drawer rails since the screw size changes depending on which piece is getting the rail.
This is really a nice piece once you put it together. It has lots of pieces & parts! It's not too hard to assemble but definitely takes a lot of time! Took 5 hours. Very pretty tho!
I'm too lazy to dig through my chest of drawers, with this I can see what's where very easy. I did have to cut a couple of my own shelves but that was a cinch.
These look great in our bedroom. Composite wood as should be expected but still happy with them. We bought 2 dressers and matching nightstands and had two pieces with damaged tops. Overstock quickly sent replacements, very easy!
If you need further help or information please visit our Online Help Center