The directions were clear and everything worked. The only hiccup occurred when I decided to change the position of the mount's connection to the TV and it would not quite fit without substituting 4 smaller washers. Everything was fine for the 46" LED TV set I mounted on the wall.
I got this product to mount an 80" to wood studs. Product is sturdy, and the tilt function works well. However, I used the leveler installed in the product to level the mount during installation, and turns out the leveler was installed on the mount at a slight angle.Even thought the leveler showed a perfectly straight mount, when the TV was mounted, it was slightly off. With an 80" TV this is very noticeable, and made the set up look poorly done. When I double checked with my own leveler, it was in fact outside the lines. I suggest either taking that tool off the mount, or not including it and having people use their own leveler. This was a very annoying problem and it was due to a poor product design.
If you need further help or information please visit our Online Help Center