This is a really good alternate for creating just a few labels or labels with slight differences instead of dealing with larger sheets, especially for inkjet printers.
I've used this product before and had a little problem with alignment. I work around that by first printing the entire template on a sheet of normal typewriter paper. I then align the edges of that sheet and the edges of the Avery paper and look through both sheets at once with a bright light behind the papers. I can then see how well the text etc, which is printed on the typewriter paper, lines up with the borders and separations of the Avery paper. I make certain there's a reasonable amount of space all around the printed text that's on the typewriter sheet as it relates to the divisions on the Avery paper. If the alignment looks good I print one sheet of the Avery paper. If changes are still needed I make those changes before putting another sheet of Avery paper into the printer. After the desired alignment is confirmed I name and save that file in my doccuments. After that's done the cards come out looking nice. If I required absolute perfection without doing any alignment work I'd just spend the big bucks and use a professional printing company. Avery gives me acceptable cards without a huge expenditure of time and resources, as well as the fun and satisfaction of printing my own custom cards.
My cards look great, but they were a pain to make. Every sheet that went through my printer jammed. if I wanted to print on both sides of the card I had to do one side, then reload the sheet and print the other side. One page came a part in the print and some of the cards got stuck in the back causing another paper jam. I feel like it was too much work just for some contact cards for a program I run. Im not sure whether or not I would recommend these. Maybe if you just made them but had Avery print them it wouldn't be a problem?
If you need further help or information please visit our Online Help Center