Solid desk, will see how it fares over time. It is a rather complicated assembly. Instructions lacked a couple of significant explanations and images especially regarding direction of draw rails. Cam locks will install with included Allen wrench, but metal on cams is not high quality, so need to be careful when tightening. Found I had to use large flat-head screwdriver for final tightening as hex parts were stripping with allen wrench. Front access panel to keyboard drawer was disappointing. It would not close under desk top when draw guides and magnetic closure were installed using pre-drilled pilot holes. Magnet is also very small and cheap. Should be larger for size of lid. Found location of pilot holes on underside of desk top for the magnetic closure did not match magnetic closure part. I suspect they changed the magnetic closure part and did not adjust width of pilot holes (holes were too close together to align to magnetic closure mounting holes. Aligning all the pins and holes in desk top is a two person drill -- at least. Some required slight adjustment. Not near enough glue for the pegs installed in front decorative pieces on left and right.
- How did the color on site compare with the actual product? Accurate
- Please tell us about the quality of the product. Solid composition, top pressed board under laminate.
- How accurate was the on site description of the product? Accurate
- Would you recommend this to a friend? Yes