The Milton Bed is excellent in appearance and the finish is very good. It is well engineered for strenght and does not have any wobble at all. The supplied allen keys are not sufficient for timely assembly of the bed, especially the headboard. Luckily, I have a set of ball-end allen keys and found them indespensible for assembling the headboard. Before attempting to assemble the bed, buy 3/16" and 5/32" ball-end allen keys, some wood glue for the dowels (the supplied "Crazy Glue" is does NOTHING) and a rubber mallet. I assembled it in 2 hours by myself but with their supplied tools, it would have taken at least another hour to assemble the headboard and another half hour for the bed rails. If you intend to use this bed for a foam mattress, be aware that you will also need to buy 2 60"x40" pieces of 1/4" plywood as the mattress support grid is spaced out with 3 1/4" between each of the 2 3/4" slats. If you put the foam mattress on this support, it will eventually ooze out the bottom between the slats. I am very satisfied with the bed and feel that is an excellent value. If I didn't have the extra tools on hand, I know that my frustration level with the assembly issues would have canelled out my positive fellings about the bed. Thanks for the good deal, Overstock.