We are not 'handy' types but we didn't have much difficulty putting this together. It took a few hours and only one phillips screwdriver. All the hardware was included. It's easier if you have someone to help you hold the parts together. One of the drawer runners was cracked. We glued it together. The finish is nice with slight 'antiquing'. One tip for the not so handy: the feet of the unit have little covers over the ends that get screwed into the holes in the bottom of the unit. Take the little covers off before you start trying to push them into the holes! Another tip: Don't put the back on until you figure out where you want all your wires to go.
- Would you recommend this to a friend? Yes