We were looking for better quality from here but were very disappointed. Guess I'm used to Sauder quality, this is not even close. The drilled hole in one side panel for the fixed shelf were all drilled the same size, should have been one big, 2 small...they were ALL big, so shelf insulation was a hassle. The bottom back brace was drilled 3/8" off on one end. Had to plug the holes and re drill to get the back to fit flush. All the drilled holes on one side, for the decorative molding were off by 1/4". They all had to be filled and re drilled. Chips VERY easily, especially on the bottom edges. We have built many pieces over the years, this was by far, the worst experience.