sweetpeascc Review

Options:

This item is out of stock.

Rating
A nice, simple desk
 from TN,  Aug 7, 2011

I've read reviews on other sites claiming this desk is made of particle board. It isn't, it is actually made of solid wood. You can tell by looking at the end grain of the pieces, it is clearly real solid wood. I like the desk, it is an attractive design and once assembled correctly, it is s nice looking and functional little corner desk with a classic look. I am giving four stars because mine exhibits some of the same things that others here are complaining about. Mine arrived with one cosmetic blemish, it looks like a scrape mark or something along the edge of the top. Also, the drawer slide brace was cracked in a way that does not effect the form or function of the piece. My box had no damage, so I don't think this is happening as a result of improper handling during shipping. I think this is something going on at the factory that is causing these issues with damage. The instructions did have one or two illustrations that were inverted, which caused a moment of confusion. But it was easy to figure out. I assembled it myself in about an hour and a half. The dowels are either too short, or the dowel holes are drilled too deeply. When I put the dowels in, they go so far in that only a quarter of an inch or so is sticking out. So, you have to be careful about that. I also ran out of wood glue, as the tube that comes with the desk holds a laughably small amount. So I had to find my own adhesive after assembling half of the desk. All that said, I still like the desk and for the money think it is still the best deal I've seen for a nice simple classic corner desk. I appreciate that it is solid wood, so I give them a pass on one or two dings. Yes, the holes and screws and bolts don't always line up perfectly. But the instructions say not to tighten anything until the end. If you follow this instruction and leave all of your screws and bolts loose until the end, you should have no problem getting everything to line up. Once you get everything lined up and all of the screws and bolts started, it is easy to tighten them and bring the desk in to square. The desk sits flat on the floor, and doesn't wobble. It feels solid. I wouldn't stand on it, though. I would recommend this desk to a friend and if this one were lost or stolen I would probably replace it with the same desk.

  • Would you recommend this to a friend? Yes
Was This Review Helpful?
 
 

Sponsored Links