BEWARE BEWARE BEWARE First, I'm a fairly handy guy who can assemble this stuff no problem. Expect it to arrive in 4 60lb boxes generating dozens of cubic feet of waste. Talk about environmental disaster! Once you've managed to unbox and dispose of all the waste, be prepared for one of the most tedious cam and bolt construction projects of your life. It literally took hours over 3 days to get this built. In the end the way the drawers on the bottom are assembled, and the fact that the lower half has no cam/bolt set for holding things together, causes the drawers to never lock the single side that has a groove for a wheel. The other side of the slide is flat and simply lets the drawer fall off. Therefore there is no practical way to assemble this without the drawers being crummy. Plus, there's not even a catch mechanism for the doors for the top parts -- not even a simple magnet. There was no reasonable way to return it so overstock gave us back a small percentage of the cost for a non-functional unit. I'm going to install side mounted ball bearing slides myself for the drawers and a magnetic catch for the doors with the refund. The absurdity of whole situation is beyond words.
- Would you recommend this to a friend? No