SwissLux Euro Flex California King-size Foundation and Frame In One Mattress Support System

Today: $274.99
Out of stock
  • Enter your e-mail address, we will notify you if it comes back in stock.

This strong, space-saving California king bed support system replaces the bedIs box spring and frame, and it offers 14 inches of extra under-bed storage. Featuring all-steel construction, this robust bed foundation supports up to 2,000 pounds.

Details

ITEM#: 13862559

Designed to replace your existing box spring/foundation and frame, the all-steel construction offers superior strength vs. other traditional mattress support systems. This product provides increased storage space under your bed and is height adjustable for a high or low profile configuration.

  • Foundation/frame measures 12 inches high
  • Materials: All steel construction
  • Supports up to 2000 pounds
  • Replaces both your frame and box spring
  • Foundation frame dimensions: 12 inches high x 72 inches wide x 84 inches long thick
  • Under bed storage space measures 14 inches
  • Eight adjustable Legs with levelers
  • Two headboard/footboard adapter plates with hardware
  • Bonus luxury circular knit mini skirt
  • Assembly instructions included
  • No tools required (A wrench or pliers may be used to better secure wing nuts to the frame)

Specs

Dimensions See Description
Manufacturer Warranty 20 year Limited Manufacturer
Materials Steel
Model Number 45202
Mattress Type Foundation Only
Thickness 12 Inch
Support Firm

Customer Reviews


5 Stars
0
4 Stars
2
3 Stars
1
2 Stars
0
1 Stars
0
  • Excellent quality with only one complaint

    I have been looking for a bed frame system that would eliminate a box spring setup and allow under bed storage. I am very happy with this frame system except for the cheap fasteners that came with the bed. The Good: The frame is well built and far heavier duty than a regular bed frame. The steel tubular legs are actually three pieces that screw together using threaded plastic tube fittings and threaded metal shafts. They come all assembled so nothing needs to be done to them during assembly other than attaching them to the already assembled frames. ( I don't love the idea of plastic joint pieces but the legs are always under compression so the plastic should not prove to be a weakness and seem to be quite strong and well designed.) The leg joints are made up from a longer piece a shorter piece and a screw in foot piece. This allows the height of the bed to be lowered by about 3 3/4" if your mattress ends up being too high for you by just removing the shorter piece. The screw in foot piece allows for adjustment to accommodate uneven surfaces. Once assembled correctly, the frame feels solid with no movement of the parts against each other and therefore no squeaking. It is well built and the paint finish seems durable. There's about 11 3/4" of clear space between the bottom of the frame and the floor with the full leg height utilized, the foot piece not screwed out any, and siting on a medium pile carpet. The frame I bought was for the California King and included two twin width frames that just sit side by side and work just fine. I left a small gap between them so they wouldn't ever be able to rub on each other. The frames are hinged in the middle for shipping and the rods that support the mattress are welded to the frame. The bad: The fasteners are a 6mm bolt with a wing nut welded (or NOT) to the top. This is an all metal frame system that is completely welded except for attaching the legs. Since this is metal on metal you want a nice tight assembly or it will end up squeaking when the bed moves. I used a small set of pliers to tighten down the included bolts but the tops twisted off almost immediately, some were not even welded to the bolt and twisted off with my fingers. I went to the hardware store and bought 32 6mm bolts (I cant remember the thread pitch and length, take one of your wing bolts with you and match it.) with lock washers and assembled the legs without any other problems except two holes were not actually threaded and would not accept a bolt. Fortunately they were on the legs that used four bolts to attach them and really didn't need all four. The threads are formed in the tubing wall so snug the bolts down until the lock washers are flattened and it feels snug but don't over tighten them or you will strip the threads out of the hole and will have to drill the hole all the way through the tube and use a longer bolt with a nut on the leg side. Conclusion: I am a manufactured/ product designer so I am really particular about what I spend my money on. I would recommend this frame system to any one so long as they know to go and get replacement bolts and lock washers before assembling the frame. I have been using my frame now for 2 weeks with a very heavy mattress on it and I could not be more pleased.

    Read More
  • it really is cal king

    this was a great purchase.first time I got a cal. king that's really a cal.king.

    Read More
  • Needed vise grips!

    The screws have built-in wing nuts that were so difficult to turn that they finally broke off. We had to use vise grips to grab the screws. Once we got it assembled we like it well enough.

    Read More

Questions & Answers

Get your product questions answered right here.
Guidelines
  • does this metal cal king bed frame come with eight or nine legs that attach to the frame.

    Guidelines
    • Hi newyork99, this bed comes equipped with nine legs that attach to the frame. Thank for stopping by !

  • Is there any recommended mattresses to use with this frame?? I bought a memory foam and want to be sure this would be a good match

    Guidelines
    • Hello almal90301, Your mattress will work on this support system. Thank you for shopping Overstock.com; let us know if you have any additional questions.

  • Can this frame attach to a wood headboard and footboard? If so, does it come with the attachments needed?

    Guidelines
    • Hi barbie1ca, unfortunately this item does not come equipped to attach a headboard or footboard. Thanks for shopping with us.

  • Can this frame attach to a headboard?

    Guidelines
    • Yes. This item comes with two headboard/footboard adapter plates with hardware.

  • IT SAYS 14 IN. CLEARNCE,BUT IT IS 12 IN. TALL HOW IS THAT? IS THERE 14" CLEARNCE UNDER THE BEAD OR NOT? AND IS THE CALKING 1OR 2 PEACES? ie.. IS THERE 9 OR 12 LEGS ON CALKING? THANKS IN ADVANCE.

    Guidelines
    • The clearance is 12” and the bed measures 14” high. The King size frame comes in two twin pieces that is put together and it has 9 legs.

  • how many pieces is this produce ?Is the foundation attached to the frame? Is there any

    Guidelines
    • It depends on the size. If they order a king it comes in two twin pieces. Anything smaller is one piece and they just need to install the legs.

Shopping Guides

Shipping & Returns

Mattress Return Policy:

Mattress Sets are non-returnable upon signature at delivery. Mattresses are non-returnable if opened or taken out of their plastic wrapping.
More Details

Shipping Information:

Our standard shipping method is ground shipping. We also offer expedited shipping for most items. Your final shipping cost and estimated delivery timeframe will be available at checkout.
Standard shipping details
Expedited shipping details

* For your protection, all orders are screened for security purposes. If your order is selected for review, our Loss Prevention Team may contact you by phone or email. There may be a two business day delay to process your order.

** Most Oversize orders are delivered within 1-4 weeks. Some orders may take 6 weeks to be delivered.