Stylo Cuadrato Sink

I purchased two of the Cuadrato sinks for my master bath. The sinks are beautiful. They arrived very well packaged from Overstock.com. Installing the sinks proved to be a bit more complicated than I originally thought. Since the sinks have a built-in overflow, a special drain must be used. I elected to use the "pop-up" drain style (that does not use a lever to open and close the drain stopper). These drains have a cut-out just below the stainer that allows overflow to discharge into the drain. Unfortunately, these sinks have a fairly large orifice between the inside of the bowl where the strainer sits and the underside where the drain pipe connects. Most of the "pop-up" drains available at home centers and here on Overstock.com have a threaded base that extends all the way up to the bottom of the overflow cut-out. What does this mean? Well, the gasket that seals the drain to the underside of the sink sits around pipe thread. Even with teflon paste around the thread and tightened adequately, water will run through the thread and out the bottom of the fitting. I tried two different drain designs and had the same results. A little advice if you run into the same problem....use plumbers putty in place of the rubber gasket on underside of the sink. This will seal around the bottom of the bowl and make a nice watertight connection between the sink and the drain. So far, I've been leak-free for over a week on both sinks. Oh, another hint...use silicone caulk under the strainer flange on the inside of the bowl. It seals tighter than a gasket or even plumber's putty and holds the drain stationary.

I was a little afraid to order a sink that costs so little, but after receiving it I was quite pleased. The size and heft was really good, and it was well packaged against breakage. (I actually had a hard time getting it out of the thick, sprayed foam, but at least it was transported without damage.) It does look more expensive than it is, by far. ONE CAVEAT: For those who are thinking of pairing this with a bronze or brushed nickel faucet, you should know that the overflow hole, high on the front side of the sink, is chrome. You really can't see it in the picture, and I was a bit disappointed. But since that will be on the side of the sink that is toward me, I won't have to see it all that much. I've decided to go ahead with the brushed nickel. Still, I would have liked it to match.Other than that, the sink looks like a million bucks. A perfect size and look for a modern bathroom.

We'd been looking for a smaller than average sink for some time. I read the reviews on the Cuadrato and decided, with some reservation, to order it. The sink came very well packed, and after looking it over, I couldn't be more pleased with the look and quality. I won't hesitate to order again.

The sink was very well packed, surrounded by foam in a box within a box, not a scratch on it. It has a light gray "B" (for Briggs) logo visible on the inside, which I'm not crazy about. You can find the manufacturer' if you search for Briggs Plumbing. We repurposed a buffet to use as a vanity, so we had stringent requirements for sink measurements. The sink only sits 3" above the counter, which we like since the vanity is tall. It does not need a mounting ring--you cut a squarish hole using a jigsaw with the provided template, and mount the sink into the hole with silicone caulk. It does not come with a drain, so you must purchase your own. This sink does have an overflow, so be sure to purchase a vessel sink drain that includes an overflow. We used an umbrella pop-up drain sold by the orange big box store. The blue store has to special order all vessel sink drains, and costs twice as much. The sink looks fabulous, and functions as it is supposed to. I was concerned about splashing, so we lowered the water pressure at the the shut-off valves. I searched and must have looked at a thousand vessel sinks, and always came back to this one. The fact that it is one of the least expensive was a big bonus.