Heavy-duty 20 GPM 12-volt Fuel Transfer Pump

I would recommend this to anyone looking for a good pump that want break your wallet. It had all the parts you need to get started except cable ends if you run it directly from the battery. I have already use it over 5 times, and I am very pleased!!

• How did the color on site compare with the actual product? Looks even better in person
• Please tell us about the quality of the product. Good heavy duty parts and hoses. Just as good as Fillrite
• How accurate was the on site description of the product? Very accurate description

Just used once but was great and fast Not tooo hard to assemble but it doesn't come with a bung hole adapter so you have to buy one for $12- $30 from some other supplier unless your tank has 2" pipe thread. I bought a plastic bung adapter to 2" which was hard to find and put it in and then all went well. Easy to wire up the unit but one screw was painted too tight to unscrew wiring cover plate so I have to hammer and screw driver it off and pound on the plate and twist it after removing the other 3 screws to loosen the 4th screw. Then all went well. Poor directions, not sure what one red lever on the side is for. maybe a lock out or something. Then you probably want to buy some battery cable clamps to put on the end of the wires you plan to connect to a battery. Then it runs great. We will see how long it lasts but I have minimal use for it so I think it was worth saving $100 over the other brands.

• How did the color on site compare with the actual product? same
• Please tell us about the quality of the product. Just used once so far but seems to real move the fuel and works well
• How accurate was the on site description of the product? Pretty close - some adds have a confusing term about bung adapter which is not there

Great quality and you cant't beat the price. All other pumps werr three times the pricew.

• Please tell us about the quality of the product. Excelent quality
• How accurate was the on site description of the product? Perfect

The Troy fuel pump looks exactly like my old Fillrites except all the fasteners are cheezy and substandard. The bolt heads are thin and don't fit either metric or SAE wrenches. It works well though, doesn't seem to have any leaky casting flaws and has a nice heavy filler hose but it has no swivel for the handle. I had two Fillrite pumps with 12VDC motors that failed after little more than 1,000 gallons. It's hard to beat the Overstock price though.