This is a very professional, sleek, modern, clean design for an incredibly low price. I can't wait to get it installed above our professional model stove, and I think they'll look stunning together. You should note that this is not a recirculating type range hood. The product description didn't say. This must be vented from above or behind so if you don't have ducting the installation needs a roof penetration. So it will cost us to install, but this is a better product. The ventless recirculating type are pointless. This has a very nice design. You barely see the stainless steel buttons. Thanks, Overstock!!
How did the color on site compare with the actual product? Stainless Steel
Please tell us about the quality of the product. Really incredible quality for that price!
How accurate was the on site description of the product? Not much description but it was what we were looking for.
Very attractive and professional looking product. I replaced my mother's over the stove micro-fan combination with this and a countertop m/w. While not super quiet, it was infinitely more quiet than the ones you typically see at Sears and Home Depot.. Removing the old combo unit left about 8" of untiled drywall eposed. I bought a 30x24 stainless backsplash from Lowes for $40 that was designed to go between a braun hood and the range. It fit perfectly and was the finishing touch to give a rather ordinary slide-in electric range a really classy appearance.
How did the color on site compare with the actual product? same
Please tell us about the quality of the product. Very good
How accurate was the on site description of the product? good
This is a sleek looking hood with three fan speeds and halogen lights. It's a fine product for a standard home kitchen, and it meets the important (for me) criteria of an output vent at the REAR of the hood, rather than just at the top. Not so easy to find.
It's a little noisy above low speeds--but aren't they all?
The one design improvement I would make is to move the two halogen lamps from the rear of the vent forward, away from the wall. They make a nice light, somewhat dramatic backlight, but they're so close to the wall that the light highlights the wall but throws into shadow anything (like a decorative platter) that hangs above the range. That's not a complaint; I'd just rather have something that provides more even light above the range.
I can't comment on ease of installation; I hired someone to do it.
I'd buy this product again.
How did the color on site compare with the actual product? Perfectly
Please tell us about the quality of the product. The quality seems to be fine. It's a handsome unit.
How accurate was the on site description of the product? Completely accurate.
I researched several products before purchasing, and this had the best reviews for the cost. The stainless matches my GE appliances perfectly. The low and high fan works well, and not too loud for my use. The lights are set near the back, and because it is not completely against the back wall because of under shelf alignment, it is perfect. I feel fortunate to have found such a solid product for the price.
How did the color on site compare with the actual product? Is exactly what I thought I was ordering.
Please tell us about the quality of the product. The quality is comparable to other more pricey hood fans.
How accurate was the on site description of the product? I have had it installed a short time though know it will be the look and quality I am looking for thong term.
This stainless hood is very nice looking. The lights are located on the back so it lights up the rear area of your stove or shelf behind the stove. I was disappointed that the lights only had one setting, no dimmer light. I should have read the specs better. Also the fan only has 2 speeds even though it has three speed buttons. The middle button does nothing. Overall, it looks great and I am happy with my purchase. My husband and I installed it together. [ He did most of the work while I supervised with a glass of wine and held things in place when he asked! ]
Very nice looking rangehood, hard to beat the price! One thing I don't like about it is that the lights are on the back of the rangehood unlike almost all other rangehoods that I have seen. Therefore there is really no illumination on the front where you cook. If it weren't for that, I'd give it 5+.
How did the color on site compare with the actual product? OK
Please tell us about the quality of the product. Seems to be quite a nice rangehood
How accurate was the on site description of the product? OK
I would like to purchase this produce but wnat to know that is has a vertical vent, already presnetly in place.
Thank youmkramer4321 on Mar 21, 2014Please enter a valid question.Answer This Question
Hello mkramer4321, thank you for your inquiry! There is no vertical vent in place. It goes under a cabinet. The cabinet will disguise the duct. I hope this helps. Happy shopping!
overstockcustomercare1 on Apr 3, 2014
Hello carabrianne, This hood has received excellent reviews! Yes, you connect the range hood to a designated standard outlet or you can cut off the plug and connect three wires (black,
white and green) to house wires and cap with wire connectors. Connect according to colors (i.e. black to black, white to white, and green to green). I hope this information helps. Thanks for shopping with us.overstockcustomercare1 on Mar 1, 2014
Can you please tell me what the acutal mfg part number or series number is for this unit? In the mfg installation guide there are several UC200 units.aecauqq on Dec 3, 2013Please enter a valid question.Answer This Question
Hello aecauqq, we would love to help! Than manufacturer Part No(s) is UC200-SS. Thank you for shopping with us. overstockcustomercare1 on Dec 4, 2013
Do you have an actual spec sheet for this posted somewhere? I'd like to see the dimensions for the unit you are selling drawn out, if possible--I find it tough to believe that the total height of the unit pictured is only 2 inches total. Thanks in advance for any materials you can direct me to.gbam on Apr 16, 2013Please enter a valid question.Answer This Question
Unfortunately, this item is presently out of stock. We currently do not have inventory to check, and cannot guarantee the item will be restocked. Please feel free to check back with us periodically to see if the item has returned.
If you like you can put your email in the blue box and we will notify you when we have this item back in stock.
Thank you for shopping with us! overstockcustomercare1 on Apr 17, 2013
based on two responses below. is is 2 or 5 inches high.rkpd on Mar 24, 2013Please enter a valid question.Answer This Question
Thank you for your interest in the Cavaliere UC200 Steel Under Cabinet Hood Stainless. The measurement of the hood is just 2 inches wide. The other is a classification for us. We are sorry for the confusion and hope this helps you out. Have a great day.
overstockcustomercare1 on Mar 26, 2013
Thank you for contacting us, the weight is 22 pounds. Please let me know if you have any further question.overstockcustomercare1 on Mar 18, 2013
What class is this? The cavaliere website shows several difference classes for UC200. Each class has different features, but I'm mostly interested to know the exact height of this hood. E.g. for 1800 the height is about 5" and for 1900 it is about 6"... which one is this?randomguy3120 on Nov 5, 2012Please enter a valid question.Answer This Question
Size Available : 18.9" x 30" x 5" (l x w x h) Stainless Steel Range Hood
overstockcustomercare1 on Nov 6, 2012
How far above the stove surface does the product need to be installed to be effective? My current unit is only 15 1/2 inches above the stove surface and is very inconvenient when using tall pots and canners. Thank you.jhousto on Sep 24, 2012Please enter a valid question.Answer This Question
it states in the product details that the unit is 30 inches wide x 19 inches deep. how tall is the unit? (the total height measurement?)mavsclan on Sep 3, 2012Please enter a valid question.Answer This Question
I HAVE THE OLD STANDARD 7" DUCT THROUGH THE UPPER CABINET. YOU STATE THE UNIT NEEDS TO BE DUCT THROUGH THE REAR USING SQUARE DUCT, IS THERE A CONVERSION UNIT .wazzco on Aug 2, 2012Please enter a valid question.Answer This Question
I THINK, but I"m not 100% certain, that it can vent either way. I probably got that information online someplace.otessier on Mar 27, 2013
What is the exact height of the hood at the back where it meets the wall? That height or depth is crucial for a fit for my location. on Jun 16, 2012Please enter a valid question.Answer This Question
There are two dimensions for this request. From the bottom to the back ledge (flat) is 11.97". Then from the back it has a diagonal slant which will extend the bottom to the top of the unit to 18.9".overstockcustomercare1 on Jun 19, 2012
can this be used as a nonducted unit? on Feb 21, 2012Please enter a valid question.Answer This Question
Shop Overstock.com and find the best online deals on everything for your home and your family. We work every day to bring you discounts on new products across our entire store. Whether you're looking for memorable gifts or everyday essentials, you can buy them here for less. O.com Price™ OVERSTOCK.COM - IT'S ALL ABOUT THE O™ O.™