Overall, this TV mount is definately worth the money. It took about 40min to install, very easy! The directions included were extremely easy to follow. All you need is a stud finder, a drill, screwdriver, and a level. Although this item comes with a level, i wouldn't recommend using it due to how it mounts. I used it, and only after i completely install this mount on my wall, I wanted to double check my work. The level's backing fits into the circles on the TV mount. There is a little play between the backing of the level and the circles on the TV mount. Because of this, my TV is at a -1 degree slope, not noticable by any means, but still. If you're not a profectionist, by all means, use the included level. If you use your own level, you'll have no problems. Another problem I ran into was one of the bolts that attaches the horziontal bars to the vertical bars had no threads, a manufacturing error. This was quickly solved by the numerous extra bolts included with this product. I compared one of the extras bolts to the other three mounting bolts and they were identical in every way, so I used it and haven't had any problems thus far. The tilt feature is a must have feature. I mounted this in my bedroom, where the bottom of the TV is 6ft off the ground. The tilt angle is perfect for viewing in bed. Unless you're mounting it at a viewing level parallel from where you're sitting/laying, then the tilt isn't necessary. Other than those two miniscule problems, I don't think you'll find a better product for the money. The build quality, welds, steel quailty, and finish are nop notch. I definately would buy this product again!